Some Ideas For Wood working

More on the ladder flipper toy

More than you ever needed to know about the ladder flipper! Bob Rhoads made the ladder and supplies these actual dimensions:

• Rungs are 8.5mm each
• Rungs are 61 MM apart at center
• Ladder uprights are 36MM s apart on insides
• Toy hole is 9mm
• Hole is centered 15.5 mm down from each end
• Toy is 28 mm wide and 66mm long

When the toy rests on a rung, you should have a 6mm gap in between it and the edge of the rung above it.


*********


The "Toy-Making Dad" has detailed instructions on his web site. I really should have put a few minutes of research into this project before I started!


*********

Lane Steinsultz clued me in on this site that has an actual diagram.

*********


And Finally, Rance Rupp, over on LumberJocks, shot this video: