Showing posts with label is. Show all posts
Showing posts with label is. Show all posts

Saturday, February 22, 2014

A Touch of Patience is Required

If there is one thing I dislike reading in blogs it is the obligatory "Wow, seems I havent written anything here in a while, I will have to remedy that." post. In my experience that means one more post will pop up in my reader, followed by another six month (or longer) lapse. 

Ive taken sabbaticals from writing here as frequently as possible before. Mostly for not great reasons. This time around I am happy to relate that it is because we have been spending time moving into a new home we purchased on the north side of La Crosse. 

Better yet, this house has a sizable garage that will become the home for a new shop/studio space. Im out of the tin shed and into a real structure. 

The house is around 80% unpacked and set around. The studio is about 65-70% set up. When it hits a more complete number I promise a new shop tour. The biggest hamper is we have yet to arrange an Internet hookup at the house, leaving me to resort to our mobile phones and coffee houses for my data needs. 

Needless to say nearly everything in our lives has taken a backseat to this endeavor, but I should be able to spend some time making shavings by early July. 

I have still been thinking about and planning posts this whole while. The notes app on my phone is chocked full of them an Ill be getting some of those out soon. 

Until then the management would like to thank you for your patience while this area is under construction. 

Ratione et Passionis 
Oldwolf. 
Read More..

Monday, February 10, 2014

The arched top door Minster Oh Side 2 is underway

I have planed down, squared, and scribed the white oak for the opposite side of the door, and have glued and clamped it in place. I want to make sure this has plenty of dry time, so this will sit for at least a day, if not more, before I trim it.
After trimming, I will begin the sanding/staining/finishing process.

Read More..

Wednesday, February 5, 2014

Rough Cut Woodworking with Tommy Mac Trailer is released



Finally the trailer for Rough Cut - Woodworking with Tommy Mac has been released. Check it out and youll be as excited as I am. Also, thanks to Rick Waters from The Splintered Board for pointing this out and bringing it to my attention.

Now, lets all spread the word and get Tommy the attention he deserves.

UPDATE 7/23/10 - Heres a link to a great article on Tommy and the show from the Canton Citizen. Its a very good read.
Read More..

Wednesday, January 22, 2014

The hall tree is done!

As you might have guessed by the title, I finished the Hall Tree today.  It took 3 weeks instead of the projected 2 but the extra time was worth it.  I learned a lot from this project and look forward to finishing the kid sized table.
 
My buddy Jason came over and helped me to rub out the finish with some 000 steel wool and some paste wax.

I had a 10% off coupon for Lowes so we picked up some double hangers for the front and single hangers for the sides.  I wanted to put in hat/coat hangers but they didnt have them in the finish that I wanted and I didnt feel like waiting so I bought the doubles.  We measured and taped a ruler to the back so we could get them all the same height.  The opening is 22.5" so the center hook is at 11.25" and the sides are 5" in from the outside.


I put one hook on the right side for backpacks.  We tested it in place and there was not enough room for the door to open with a backpack hanging on the left.  We can always add another hook later.



I dont want my youngest son to be able to easily knock the tree over so I made some cleats.  I took a  1x2 and cut it down to 2 - 18" pieces.

I used a 1/2" straight cut bit in the router and made several passes by moving the fence back about 1/8" each time until I got the depth I wanted.

I made some test cuts first on scrap wood first to determine the height of the bit.

This is where the tree is going.  We also put in some doors stops in the hinges.


I marked where the cleat was going and managed to find 1 stud.  I used drywall hangers on the outsides.  I pre drilled and screwed the cleat into the stud first and tested the fit.  The tree was about 1/8" off the ground so I moved the cleat down 1/4" and then tested again.  It had the fit I wanted so I drilled the 2 drywall hangers in.

I made sure everything was level before I drilled any holes.


I pre-drilled and screwed the top cleat into the rear of the shelf and used 1.25" drywall screws.

This was exactly the fit I was looking for, just a little bit loose.

I left the back open to acommodate the light switch.  I also moved the picture frame higher.

Now that it is in place I wish I had mounted the hooks a little higher.  There are 2 - 5" boards under the shelf and I mounted the hooks to the middle of the bottom board.
 
Now all the kids shoes are in the tree and not on the stairs for me to trip over in the dark.
 

Read More..